Backgammon set that should close together with all the checkers inside; 2 dice needed but not included.
One side of board: 201.8mm x120.4mm x11.8mm
Checker: 7.5 mm radius, 5.5 mm height
Printing: The simplebgboard.stl and axle.stl files must both be printed twice. If scaled down, the axle probably won't fit, my suggestion is to try a piece of wire or a paper clip. A paper clip can be bent to form the hook on the front. The checkerset files print a full set of 15 checkers. Print twice in different colors. I have included a separate checker file in case replacements are needed. This is a link on rules and how to play http://usbgf.org/learn-backgammon/backgammon-rules-and-terms/rules-of-backgammon/ . Enjoy.
| axle.stl | 646.4KB | |
| checker1.stl | 2.8MB | |
| checker2.stl | 237.1KB | |
| checkerset1.stl | 42.2MB | |
| checkerset2.1.stl | 13.5MB | |
| rippleboard.stl | 7.9MB | |
| simplebgboard.stl | 3.2MB | |
| starboard2.stl | 3.2MB |
