This is not perfect by any means since I made it for experimenting. With a couple of tweaks, it could work good as a replacement enclosure.
I made this so I can experiment with different (V)ESCs without taking apart the original case. Due to the experimental nature, I did not add the cable holes or anything and you'll have to drill your own, or alter this model.
Note:
There is no curve modelled into this, so do not overtighten it to your board if you decide to try it out.
I printed mine with supports with the bolt holes on the build plate.
(I don't have intention to make a fully compatible/proper case so if someone remixes this, please post it for others to use!!)
| Backfire_Zealot.stl | 268.1KB |
