Update: 11/16/16. Graphics have been completed. Please note edge labels are included. Trim each line of "bubbles" out as closely as possible to the "bubbles themselves and they will be the right size. It should only take 3 strips to complete a board.
This is a full scale replica of a BTTF 2 Hoverboard. I did my best to make it as accurate as possible, but there are multiple versions out there all with different dimensions and slight variations.
This is a huge prop. Most parts will need to be cut in order to be printed. I did not cut them though because it will depend on your printer. You can download a free version of Netfabb in order to cut it yourself if you do not have your own cutting software.
The board here would probably be easier to make by hand by cutting it out of foam. I've included a 3D printable one for those of you who want it all in 3D. I plan on doing graphics down the line when I am ready to make one of these for myself. I will add the files once they are completed.
Enjoy.
| BTTF2_Hoverboard_Graphics.pdf | 62.8MB | |
| Full_Hoverboard.stl | 1.2MB | |
| HB_Board.stl | 90.0KB | |
| HB_Center_Shape.stl | 83.8KB | |
| HB_Main_Plate_Half.stl | 126.3KB | |
| HB_Main_Plate_X2.stl | 192.6KB | |
| HB_Plate_Connector2X2.stl | 171.0KB | |
| HB_Plate_ConnectorX2.stl | 144.5KB | |
| HB_Top_Plate.stl | 23.3KB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
