Gerneral info:
This thing uses a small 9g servo to spin a baby mobile around. in additon some LEDs will light in differnt coloer
Printing Instructions:
To create a diffused light effect, print the diffuser with a translucent filament such as white PETG. No additional settings are required for the other parts.
Non-printable parts required:
1 x Digispark (Attiny85) microcontroller
2 x M3 x 7mm melting inserts
1 x 9g Servo motor
1 x Neopixel Ring with 12 LEDs
1 x USB Cable for power
1 x M3 countersunk screw
1 x M3 button head screw
1 x cable tie to secure the USB cable
6 x small screws to attach the servo and Neopixel ring
Assembly Instructions:
1.Print all necessary parts
2.Insert the M3 melting nuts
3.Solder the connections: Neopixel pin DI to Digispark pin 0, Servo signal to Digispark pin 2, and connect the 5V and ground from the servo, Neopixel ring, and Digispark
4.Upload code from the provided GitHub link (https://github.com/AssFactory/MobileSpinner)
| Body_Rev1.00.STL | 493.6KB | |
| Bracket_Rev1.00.STL | 20.7KB | |
| Diffusor_Rev1.00.STL | 357.1KB |
