B-25 J RC Airplane Wing Connector Tool FlightLine 3D Printer Model
The file 'B-25 J RC Airplane Wing Connector Tool FlightLine 3D Printer Model' is (stl) file type, size is 23.3KB.
The file 'B-25 J RC Airplane Wing Connector Tool FlightLine 3D Printer Model' is (stl) file type, size is 23.3KB.
Tool to aid with the installation and removal 4S electrical connector for wing tips on FlightLine B-25J 1.6m. Eliminates the temptation/need to pull on wires, curse loss of finger dexterity etc
If you want to support my contributions here, please consider leaving a tip https://www.paypal.com/paypalme/Showmethedenaro
Print, glue and use.. I tool/plane is needed unless you have four hands or a crew....
I have the plane inverted for wingtip installation & removal. Tool is designed to access the plug from the underside of the plane, but it seems to work just as well from the topside. The forked side is to remove the 4S plug from the wing tip. The other side is to install the plug. Text on the tool always faces the wingtips.
This tool was more helpful in the shop where my assembly space for the wings was restricted. At the flying field, it's easier to leave a larger gap and manipulate the plugs by hand.
| Tool_Set_4S.stl | 108.8KB |
