Axton Turret 3D Printer Model
The file 'Axton Turret 3D Printer Model' is (stl) file type, size is 4.5MB.
The file 'Axton Turret 3D Printer Model' is (stl) file type, size is 4.5MB.
Axton's turret is an under valued part of the borderland's universe and has not been available on thingiverse until now. This is a very difficult print due to the small sections and large amount of overhangs so support is mandatory. The file is ~170mm tall by default which is large enough to provide easy structural support. Smaller sizes are possible as well depending on your printer's fine resolution.
**Note: Printed model displayed was done at 44% scale (Z height=75mm) and was still able to print reliably with support removal.
| Axton_Turret_v2.stl | 26.1MB |
![Sunlight Straight Sword [Dark Souls III] (Fixed Version) 3D Printer Model](https://cdn.3axis.co/assets/70/8e/35/42/708e3542-f16f-4af2-af99-c7e6a1f589fd/images/42067847-5f08-4837-9ba6-e58f9a6b4d12_thumb.jpg)
