12/21/2015 Note: I've uploaded v6 with sections not blocking the holes and a few fitment fixes. I uploaded the rest of the wheel along with hex adapters. These are pending fitment tests so there is a chance they don't quite fit together perfectly.

12/22/2015 Printed the inside piece and it has a few issues. Tabs weren't strong enough to hold the bead during assembly. The v2 I posted has the mods but isn't tested yet. I also made minor changes to the hole locations on the inner piece to reflect how the originals can adjust the tire "pressure".

12/25/2015 I've got two tires printed and installed on my Yeti! Everything seems to fit well. Btw, I did use PETG instead of PLA for these last prints. I'll see if I can break that as easily as the stockers. Merry Christmas!

12/31/2015 Tested them out yesterday and broke both of them where the adapter bolts one. I'm going to remodel them with the adapter permanently attached so you'll have to print either a front or rear rim. This isn't posted yet but I'll get it modeled and uploaded soon.

1/2/2016 Added the front and rear wheel with attached adapter. This has not been tested yet but should be better than the bolt on adapter. I left the stand alone adapter if you want to use it with the stock wheels. I have had zero issues with the 3D printed adapters so far.

1/31/2016 v9 of both rear and front were added. The integrated hex was wided and features for the nylon lock nut on the front were added.

This is a version of the Axial Method 2.2 beadlock rim that comes with the Axial Yeti kit. Print part "Yeti Beadlock Wheel v6" flipped 180 with 100% infill and supports. The rest of the print as is with supports.

I've broken a stock wheel and a lighter version of this printed one. This version is much beefed up. If you print and use it, leave some feedback on how it works.