Axial SCX24
Entire body printed in 3d.
Parts list:
-Body 4door
-front bumper
-ladder
-roof rack
-hood exhaust
-Spare wheels
the carriage is connected to the car with 2 magnets. The body already has an integrated magnet holder.
entirely printed in PLA.
The additional pieces were glued with two-component glue.
The corret is not very light, in order not to have the shock absorbers always compressed I printed spacers to be inserted before the springs, for pre-load, and inserted some very thick engine grease inside.
The bodywork and the print components were brushed with two-component resin from Resinpro. (https://www.resinpro.it/product/resina-epossidica-trasparente-gr-800-bicomponente-ab-da-resin-pro/?gclid=Cj0KCQiA48j9BRC-ARIsAMQu3WQDxNQ276EkY2T97I8TSdriNIG2MEMXA28EUYCO6ygfhqDfBS0WlXwaAittEALw_wcB)
And then colored with tamiya modeling acrylic colors.
The whole car was designed on IPad Pro with:
https://apps.apple.com/it/app/shapr-cad-per-modellazione-3d/id1091675654
Did you like my car?
Give me a small donation!
https://paypal.me/DCanepa15
| body.stl | 8.4MB | |
| bumper.stl | 4.1MB | |
| half_body_1.stl | 3.2MB | |
| half_body_2.stl | 5.5MB | |
| hood_exhaust.stl | 540.1KB | |
| ladder.stl | 73.5KB | |
| parcel_holder.stl | 133.6KB | |
| parcel_rack_feet_x4.stl | 25.1KB | |
| spare_wheel.stl | 1.2MB |
