1:1 scale AWM
printing, assembly, function in youtube video
Easy print
Interior simplified for easy print and strength of the parts
Materials needed for assembly
8x scope not included! (link:https://www.thingiverse.com/thing:3019403)
Tolerance
0.3mm for moving parts, 0.2mm for fixed parts
no need to tweak anything, just use supports
same file is also uploaded on cults
https://cults3d.com/en/3d-model/game/awm-no-springs
if you buy my model from here, i would consider it as a support
| 300magnum.stl | 2.2MB | |
| awm_barrel1.stl | 4.3MB | |
| awm_barrel2.stl | 3.0MB | |
| awm_barrel3.stl | 3.1MB | |
| awm_barrel4.stl | 5.8MB | |
| awm_bipodmount.stl | 771.9KB | |
| awm_boltblock.stl | 222.8KB | |
| awm_boltcarrier.stl | 3.2MB | |
| awm_bolthandle.stl | 4.7MB | |
| awm_boltpiece.stl | 129.9KB | |
| awm_boltretainer.stl | 426.7KB | |
| awm_buttpad1.stl | 2.9MB | |
| awm_buttpad2.stl | 2.1MB | |
| awm_buttpin.stl | 890.0KB | |
| awm_buttriser1.stl | 2.2MB | |
| awm_buttriser2.stl | 777.4KB | |
| awm_chamber.stl | 1.2MB | |
| awm_chassis1.stl | 4.6MB | |
| awm_chassis2.stl | 7.0MB | |
| awm_chassis3.stl | 2.6MB | |
| awm_chassis4.stl | 3.0MB | |
| awm_cheekpad.stl | 960.3KB | |
| awm_cheekpadpin.stl | 3.3MB | |
| awm_magbottom.stl | 3.6MB | |
| awm_magcase.stl | 2.3MB | |
| awm_magcatch.stl | 835.4KB | |
| awm_magfollower.stl | 582.2KB | |
| awm_magspring.stl | 248.6KB | |
| awm_muzzle.stl | 4.5MB | |
| awm_picrail1.stl | 215.7KB | |
| awm_picrail2.stl | 205.4KB | |
| awm_receiver.stl | 764.5KB | |
| awm_slingpoint.stl | 914.1KB | |
| awm_trigger.stl | 1.1MB | |
| awm_triggerbox.stl | 745.9KB |
