Avatar Gunship 3D Printer Model
The file 'Avatar Gunship 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Avatar Gunship 3D Printer Model' is (stl) file type, size is 1.4MB.
This is a RC Avatar Gunship with a FPV camera.
It'a powered by a 2800 mAh Lipo battery and I used a Spektrum control system. The camera is po750 mAh Lipo battery.
For more fun you need the HobbyKing KK 2.1.5 Multiboard and two 10kg Digital Servos.
It is a prototype and I'm still improving it.
Up to now I haven't found the right adjustments on the Multiboard so that the Gunship is too shaky.
Here is the video link:
https://youtu.be/ypMPR_iwktY
| Front.stl | 2.9MB | |
| Front_2.stl | 850.1KB | |
| Hauptteil.stl | 4.5MB | |
| Heck.stl | 808.6KB | |
| Heck_2.1.stl | 829.6KB | |
| Heck_3.1.stl | 770.5KB | |
| Heck_3.2.stl | 842.6KB | |
| Kuve1.stl | 453.3KB | |
| Kuve2.stl | 776.0KB | |
| Motorhalterung.stl | 3.3MB | |
| Seitenruder.stl | 98.5KB | |
| Servo1.stl | 1.9MB | |
| Servo2.stl | 1.4MB | |
| Servo_Hebel.stl | 763.6KB | |
| Stuetze.stl | 238.4KB | |
| Verbindung.stl | 314.2KB |
