Automated Door Lock 3D Printer Model
The file 'Automated Door Lock 3D Printer Model' is (stl,x3g) file type, size is 1.4MB.
The file 'Automated Door Lock 3D Printer Model' is (stl,x3g) file type, size is 1.4MB.
I built an automated door opener that lets our dogs go in and out whenever they want. I wanted an electronic lock to link with the door opener and couldn't find anything that worked so I built this one.
The lock is controlled by an Arduino system that also opens the door. The rotation is done with a continuous rotation servo. Note, the hole for the servo is slightly undersized (I filed it a bit to get a snug fit).
Print the threaded parts on a "fine" setting. The latch is setup for the door closing 10mm in front of the door frame.
After some testing I added "Spindle 8" with a slightly smaller thread diameter (runs much smoother). I also shortened the part so I could just glue on a servo gear for a better connection.
UPDATE: Added a cover for the lock box.
| Cover.stl | 60.4KB | |
| Latch_2.stl | 691.1KB | |
| Lock_Base_7.stl | 384.9KB | |
| Lock_Slide_7.stl | 200.3KB | |
| Lock_Spindle_7.stl | 374.3KB | |
| Lock_Spindle_8.x3g | 2.6MB |
