Auto Leveling Probe Holder 18mm Diameter Geeetech Prusa I3 X Pro 3D Printer Model
The file 'Auto Leveling Probe Holder 18mm Diameter Geeetech Prusa I3 X Pro 3D Printer Model' is (123dx,stl) file type, size is 83.8KB.
The file 'Auto Leveling Probe Holder 18mm Diameter Geeetech Prusa I3 X Pro 3D Printer Model' is (123dx,stl) file type, size is 83.8KB.
Print with ABS.
X-offset: ca. 3.4 cm
Y-offset: ca. 3.6 cm
This is a remix of the design by Ymita: https://www.thingiverse.com/thing:1038007
I changed the diameter for this (or similar) probe: https://www.amazon.de/gp/product/B00TK0UO20
Plus i made it more "organic".
The diameter is 18 mm. My resulted print got 17.5 mm so i had to screw the sensor in with a tongs. It's so tight, i don't need the nuts to secure it.
I used the M3 screws from the Geeetech printer kit from the bag labeled with 24. They are a little bit to long (~1mm), so i used two washers for each screw.
| AutoLevelSensorHolder18mm.123dx | 60.4KB | |
| AutoLevelSensorHolder18mm.stl | 116.1KB |
