This is a remix of a Euro Coin Sorter that will sort Australian Coins.
In Australia we have six coins rather than the Euro eight coins and our biggest coin is the 50c which is over 30mm wide - too big for the original Euro Coin Sorter machine. So I had to scale up all the parts to 125% and then make two new Australian parts.
You should be able to print all the parts without support. Except for the coin tray - I used some support at the back for that one. Due to the 125% scaling, the tolerances are now quite loose on the moving parts and I should probably tighten them up but it is functional as it is.
Model printed in Aussie green & gold of course.
EDIT 19/4/2018 : Added missing Funnel part.
| Aus_Coin_Ramp.stl | 184.3KB | |
| Coin_Catcher.stl | 249.6KB | |
| Coin_Entry_Body.stl | 211.1KB | |
| Coin_Tray.stl | 17.6MB | |
| Crank_Axle.stl | 211.3KB | |
| Crank_Spacer.stl | 101.7KB | |
| Crank_Stick.stl | 197.1KB | |
| Crank_Support.stl | 241.6KB | |
| Funnel.stl | 484.4KB | |
| Gear_1.stl | 640.3KB | |
| Gear_2.stl | 610.4KB | |
| Initial_Ramp.stl | 131.7KB | |
| Main_Axle.stl | 433.8KB | |
| Main_Support.stl | 2.5MB | |
| Separator.stl | 64.7KB |
