Audiofrog GB Series Adapters For Porsche 718 3D Printer Model Free Download

3D Printer Models

Audiofrog GB Series Adapters For Porsche 718 3D Printer Model

Author: @Santimacan

License: CC BY-NC-ND

File formats: stl

Download type: zip

Size:389.5KB

The file 'Audiofrog GB Series Adapters For Porsche 718 3D Printer Model' is (stl) file type, size is 389.5KB.

Description Files (4)

Summary

For printing, use PTEG or Polycarbonate. Designed for use with nut inserts: uxcell knurled Insert Nuts, 100Pcs M4 x 4mm(L) x 6mm(OD) Female Thread Brass Threaded Insert Embedment Nut for 3D Printer https://a.co/d/asaAXBi

GB25 on 4in location: Use this for either surround location or front door midrange location when using GB25 speakers.
718 Audiofrog Tweeter: Use this to install the GB10 tweeters in tweeter location. You will have to take the current holder by cutting clips. You will need U-nuts and bolts.
Audiofrog GB25 Center: Use for center channel location when using GB25 speaker,
Audiofrog GB40 Rear install flat: Use this one to install the GB40 speakers at midrange location. The GB40 speaker must be installed on the rear of this adapter, so that the adapter is on the front for low profile. This will protect the speaker cone and will prevent the cone from colliding with the door panel.

718_Audiofrog_Tweeter.stl	173.9KB
Audiofrog_GB25_Center.stl	393.9KB
Audiofrog_GB40_Rear_Install_Flat.stl	701.8KB
GB25_on_4in_location.stl	408.4KB

Audiofrog GB Series Adapters For Porsche 718 3D Printer Model

Summary

Tags

You might also like