I designed theese foot for the Atomstack x24 model to fit with the previous version of honey comb working panel which was too big to fit into the working area.
Also thinner wooden boards fit under the lasercutter now.
To print the foot you need to mirror each file ones:
To assemble the foot 4x M5 screws are needed. Make sure not to overtighten the scews as this would break the print.
I used a 0.8 nozzle to print faster, but a 0.4 nozzle would also do the job.
| atomstack-x24_foot_back.stl | 13.9KB | |
| atomstack-x24_foot_front.stl | 13.9KB |
