AtomStack LASER Interior 3D Printer Model
The file 'AtomStack LASER Interior 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'AtomStack LASER Interior 3D Printer Model' is (stl) file type, size is 2.2MB.
This 3D-printed decorative object is designed to illuminate the AtomStack logo and laser sections using an integrated LED system.
・Inspired by the F60: The switch is modeled after the F60 and is used to turn on the LEDs. https://atomstack.com/products/atomstack-f60-air-assist-set
・Illumination: The AtomStack logo and the laser area light up, creating a visually striking effect.
・LED Configuration: The setup includes 5 LEDs – 4 red LEDs for the logo and 1 blue LED for the laser section.
・Power Source: The object is powered by 2 AA batteries.
・Wiring Method: Clips are used in place of traditional wiring for simplicity.
・Wiring Reference: Please refer to the “AtomStack LASER interior (For wiring check).stl” file to check the wiring method.
・Resistor: A 220Ω resistor is included (adjust according to the specific LEDs used).
| AtomStack_LASER_interiorFor_wiring_check.stl | 4.9MB | |
| battery_cover.001.stl | 92.8KB | |
| knob.001.stl | 139.2KB | |
| LASER.001.stl | 242.0KB | |
| LED_stand.001.stl | 105.1KB | |
| LOGO1.001.stl | 161.2KB | |
| LOGO2.001.stl | 92.6KB | |
| LOGO_stand.001.stl | 87.3KB | |
| stage.001.stl | 694.3KB |
