Atom stack A24 Riser stand to raise total height of machine around 2.5 inches. With the solid Frame design on this model, it's hard to do bigger pieces of wood since it's not an open frame engrave. I designed this to combat the issue and be able to use any size wood even if its a lot longer than the frame. If you plan on using this for that issue, then i suggest print all 4 legs and just the front/back connector bar 2 times. 2 pieces for front and 2 for back. I've done a lot of testing on this and everything seems to work great including fitment off the rubber feet pads into the recesses of the printed feet. IF anything, printing just the 4 feet would work great. I like the connector at least in in the front so the laser light isn't blinding you.

Suggested printing for the connectors is 3 walls and at least 10% infill, mainly for dovetail strength. I'd say do at least 3 walls and 50% infill for feet considering the machine with the enclosure is roughly 30-40 lbs.

This is a big print btw, the 4 feet took about 7 hours on my p1p and the connectors take about 6 hours each 2. So with 5 total prints and 12 total pieces should be around 26 28 hours for everything.

Eventually i will update the sides to have cut outs on the bottom for using bigger materials without having to remove them.