Atomstack A20 Focus Alignment Guide 3D Printer Model
The file 'Atomstack A20 Focus Alignment Guide 3D Printer Model' is (stl) file type, size is 95.2KB.
The file 'Atomstack A20 Focus Alignment Guide 3D Printer Model' is (stl) file type, size is 95.2KB.
With this alignment tool it is possible to align workpieces with 0mm or 1mm offset to the laser focuspoint. The Atomstack laser head has a size of 63mm x 58mm.
Preparation:
1 Draw a frame in Lightburn the size of the workpiece (T1 or T2).
2 Place the graphic.
3 Position the laser at the bottom left (Frame).
4 Place the alignment aid against the laser head.
5 Place the workpiece on the alignment aid.
6 Remove the alignment aid.
7 Fire
| Atomstack_A20_Laser_Zentrierung_0offset.stl | 174.5KB | |
| Atomstack_A20_Laser_Zentrierung_1offset.stl | 152.2KB |
