Atomrc Swordfish pan camera nose compatible dji o3
The nose was designed with the following specifications:
The foam nose must be cut to a width of 22mm up to the canopy.
3D filament can be used as dowels to glue the two main shells together.
"cales20" STL is the servo mount, which needs to be printed in duplicate.
Printed parts could be glued with cyano or UHU por to the foam.
Canopy foam peg must be slightly shortened.
Enjoy your flight!
| nez-o3-v9-calendre.stl | 45.8KB | |
| nez-o3-v9-cales20.stl | 5.9KB | |
| nez-o3-v9-connecteur.stl | 31.3KB | |
| nez-o3-v9-couvercle-back.stl | 6.5KB | |
| nez-o3-v9-couvercle-front.stl | 6.7KB | |
| nez-o3-v9-fourche.stl | 34.1KB | |
| nez-o3-v9-main-left.stl | 1.0MB | |
| nez-o3-v9-main-right.stl | 1.0MB |
