AtomRC Penguin Nose 3D Printer Model
The file 'AtomRC Penguin Nose 3D Printer Model' is (stl) file type, size is 95.7KB.
The file 'AtomRC Penguin Nose 3D Printer Model' is (stl) file type, size is 95.7KB.
I'm new to scanning. This is my first real project with a scanned image. It came out "ok" but then needed some work. I'm new to the design side too, so I was pushing the limits on TinkerCAD. My original nose has been well used, so scanning it meant there was some roughness on the bottom. I've cleaned it up a bit.
Printed in TPU as it needs to squeeze a bit into the mounting holes. Magnets are 10mm diameter, and 4mm thick. I used hot glue in the hole for the magnet, then really firmly pressed in to get the glue all around.
| MyScannedNose_004.stl | 230.1KB |
