ATOMRC Penguin Motor Mounts + Spinner 3D Printer Model
The file 'ATOMRC Penguin Motor Mounts + Spinner 3D Printer Model' is (stl) file type, size is 1.8MB.
The file 'ATOMRC Penguin Motor Mounts + Spinner 3D Printer Model' is (stl) file type, size is 1.8MB.
This is a modified motor mount for the AtomRC Penguin. It fits perfecty onto to existing nacelles, just swap the motor plate.
It's primarily designed for my setup, XNOVA Lite Racing 2207 motors, but you find a version for 16x16mm and 12x12mm mount pattern as well.
If you use counter rotating props, mirror all 3 spinner parts to get the thread reversed as well. In theory this should prevent the cap to get loose while the motor is spinning.
Depending on the prop you use you want to use those shallower m5 nuts to fasten your prop securely.
Spinners for 3 bladed and 2 bladed props are available and should work for the most recent 5 and 6" propellers.
Tested with Gemfan 51466, HQprop 5045 biblade, HQprop Ethix K2 (6040 biblade), Gemfan 6043 biblade, Gemfan Flash 5152 biblade
| motor_mount_12x12_v4.stl | 649.1KB | |
| motor_mount_16x16_v4.stl | 653.0KB | |
| spinner_1_v4.stl | 2.0MB | |
| spinner_2_bi_v4.stl | 411.7KB | |
| spinner_2_tri_v4.stl | 350.4KB | |
| spinner_3_v4.stl | 619.5KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
