Atomrc Dolphin Twin Motor Conversion 3D Printer Model
The file 'Atomrc Dolphin Twin Motor Conversion 3D Printer Model' is (stl) file type, size is 613.5KB.
The file 'Atomrc Dolphin Twin Motor Conversion 3D Printer Model' is (stl) file type, size is 613.5KB.
Twin motor pods for the Atom RC dolphin. You need longer 3mm bolts for the motor, and a 35-40mm bolt to hold the mount to the pod.
Glue these to the wing, I glued mine 50mm from the inner root of the wing, centered on the holes. The two holes on the top are to stick bbq skewers through to strengthen the hold to the wing. Probably not needed, but nice to have.
This is for the right side... mirror in your slicer for the left.
Update 28 Mar 24. Added V2 motor mount with improved cooling hole for ESC, 3 Degrees downthrust, and scaled to 99% as some folks printing in PLA said the mounts were too big.
| Dolphin_Motor_Mount.stl | 415.5KB | |
| Dolphin_motor_mount_v2.stl | 392.7KB | |
| Dolphin_motor_pod_v13.stl | 632.2KB |
