AtomRC Dolphin Motor Adapters 19×19 16×16 3D Printer Model
The file 'AtomRC Dolphin Motor Adapters 19×19 16×16 3D Printer Model' is (f3d,stl) file type, size is 166.8KB.
The file 'AtomRC Dolphin Motor Adapters 19×19 16×16 3D Printer Model' is (f3d,stl) file type, size is 166.8KB.
This is an addition to the nice "AtomRC Dolphin Better Motor Mount'.
It allows you to attach a standard 22xx/28xx/etc motors with 16x16mm or 19x19mm mounting holes onto that mount. Be advised that these dimensions are DIAGONAL, not square.
You'll need 3x10 screws.
If you use a wide motor like 28xx - you need to insert the long screws before mounting the motor on this adapter.
| AtomRC_Dolphin_Motor_Adapter.f3d | 96.1KB | |
| AtomRC_Dolphin_Motor_Adapter.stl | 126.8KB | |
| AtomRC_Dolphin_Motor_Adapter_16x16.stl | 241.5KB |
