Atomizer Stand / Holder For Tanks With 510 Connector 3D Printer Model
The file 'Atomizer Stand / Holder For Tanks With 510 Connector 3D Printer Model' is (stl) file type, size is 70.5KB.
The file 'Atomizer Stand / Holder For Tanks With 510 Connector 3D Printer Model' is (stl) file type, size is 70.5KB.
Updates:
26.09.2016 Closed the bottom of the middle hole of the base with 1mm layer
26.09.2016 Added writting to the base
26.09.2016 Added a base for drip tips
28.09.2016 Changed design of the top parts (old ones did not fit one near the other because of the overhang)
Print and connect/combine any amount of bases you need.
Print the Top part if you want to lock down your atomizer, cut down the posts to the length that you need. Use 3mm screws to screw it on the base. Could also be used as a transport frame.
(Do not overtighten the screws, very small force is needed).
Top Piece available for different Atomizer height (measured without 510 connector and without drip tip connector)
50mm
48mm e.g. Eleaf IJust 2
40mm e.g. Aspire Cleito, Joyetech Cubis
If you need other heights of the top piece, send me a message with the height.
| atomizer_base.stl | 101.8KB | |
| atomizer_top_lock_for_40_mm_height.stl | 39.1KB | |
| atomizer_top_lock_for_48_mm_height.stl | 43.4KB | |
| atomizer_top_lock_for_50_mm_height.stl | 43.4KB | |
| drip_tip_stand__holder.stl | 118.1KB |
