Athlon Cronus GenII Parallax Adjusting Knob 3D Printer Model
The file 'Athlon Cronus GenII Parallax Adjusting Knob 3D Printer Model' is (stl) file type, size is 31.1KB.
The file 'Athlon Cronus GenII Parallax Adjusting Knob 3D Printer Model' is (stl) file type, size is 31.1KB.
This is a parallax adjustment wheel for an Athlon Cronus GenII rifle scope. I have added an outer lip that stops how far it can be pushed onto the turret. This leaves the yardage numbers easily seen. Mounting is sized for an m3 screw and nut. The inner diameter is about 34.5mm The
The numbers on the wheel, as shown in photo, are removed. I made a trial adjustment wheel for my son and he advised me that while the knob fit, the Athlon turret turned only a about a quarter turn and that the numbers also ran the wrong way, as I originally designed this sized for my Vortex Venom. Deciding the numbers were of little use on the Athlon, I removed them in my final version.
This is a remix of dan's www.printables.com/model/334833-utg-scope-parallax-wheel
I will entertain comments, requests, or suggestions. Cheers!
| AthlonCronus34pt5V2_Parallax_Wheel.stl | 125.1KB |
