AT-AT USB/SD Holder 3D Printer Model
The file 'AT-AT USB/SD Holder 3D Printer Model' is (stl) file type, size is 2.4MB.
The file 'AT-AT USB/SD Holder 3D Printer Model' is (stl) file type, size is 2.4MB.
I was disturbed by the lack of USB and SD card holders with a reference, so I decided to make this to add a bit more style to these storages. I edited the At-At from "timrbsnow" design, cutting it up and rearranging so I could add the snow base part and cut the holes for 3 or 5 USB sticks and 4 SD cards, depending on your preference. I also included a much smaller one with 3 USB slots and 2 SD card slots on the sides, should that be more suitable. The "Fallen AT-AT plain" is also just the fallen walker without any holes cut in it. Enjoy!
timrbsnow's design(sorry remixing isn't working for me): https://www.thingiverse.com/thing:1069981
P.S: If you choose to print "Fallen_ATAT_4SD_5USB" or "Fallen_ATAT_4SD_3USB" scale up the model by 105% as the USB stick holes are said to be too small, and Fusion isn't working to update the size there. Thanks!
| Fallen_AT-AT_whole_plain_v35.stl | 3.4MB | |
| Fallen_ATAT_4SD_3USB.stl | 877.1KB | |
| Fallen_ATAT_4SD_5USB.stl | 881.6KB | |
| Fallen_ATAT_small_2SD_3USB.stl | 872.9KB |
