ASUS ROG Zephyrus Laptop Charger 200W Protective Cover 3D Printer Model
The file 'ASUS ROG Zephyrus Laptop Charger 200W Protective Cover 3D Printer Model' is (3mf,stl) file type, size is 18.1MB.
The file 'ASUS ROG Zephyrus Laptop Charger 200W Protective Cover 3D Printer Model' is (3mf,stl) file type, size is 18.1MB.
why?
cuz the sticker was too nice and the charger was too shiny and clean. no longer will u scratch it while dragging on the floor. I added 4 little nubs on the sticker side to keep it off the hard ground. It also heated up like crazy, so I slapped a lattice on one side. there's a thing to wrap the cable around and keep it snug. it also stands on its own. totally a planned feature ;)
currently working on the bigger charger now. I recommend printing this with the lattice flat on the bed. turn on support for everywhere to get the inside walls. don't worry, the lattice supports are a lot easier to clean. play with the angle tolerance to reduce lattice support. finally, I recommend higher temp materials.
| v3_charger.3mf | 6.1MB | |
| v3_charger.stl | 27.1MB |
