3D Printer Models

Astro Photography 608 Bearing Adapter With Electornics Box (Nato Rail) 3D Printer Model

Author: @Aladinoo

License: CC BY-SA

File formats: stl

Download type: zip

Size:908.7KB

The file 'Astro Photography 608 Bearing Adapter With Electornics Box (Nato Rail) 3D Printer Model' is (stl) file type, size is 908.7KB.

Description Files (12)

Summary

1. Remixed Astrophotgraphy collar to accommodate 608zz bearings

2. Adoption of Nato rail

3. Polar alignment using phone (southern hemisphere friendly) ;)

the main purpose of this remix is to make it cheaper to make, and it's because they are the bearings i a have :p
print the collar flat on it's side so that it makes a V shape for best strength
print the head adapters in PETg
if needed print the TPU rubber gasket
i added NATO rails for polar alignment and the electronics box
use the phone mount adapter + "stellarium" app to do the polar alignment right
i used a "monitor head" as it's cheaper than a good quality ball mount

the assembly works well and it's pretty stable, tested with 17mm to 100mm, anything above that is difficult to keep stable.
i included a test shot for the orion belt and nebula exposure time is 44min ( stacked from 2min photos)

i'll add more photos of the finished assembly!

arcaSwiss_Head.stl	122.0KB
Astro_controller_box_v1.stl	137.0KB
Batteryholder_Nato_Rail_v1_v1.stl	79.8KB
Bearing_bore_for_m4_screw_v2.stl	31.0KB
Camera_Adapter_mount.stl	207.4KB
cap_v2_.stl	545.9KB
Knob.stl	625.3KB
Phone_clamp.stl	426.4KB
Plate_Carrier_Adapter_final_stage.stl	298.3KB
Slider.stl	21.9KB
Space_Nato_rail.stl	155.7KB
TPU_Rubber_Gasket.stl	335.8KB

Astro Photography 608 Bearing Adapter With Electornics Box (Nato Rail) 3D Printer Model

Summary

1. Remixed Astrophotgraphy collar to accommodate 608zz bearings

2. Adoption of Nato rail

3. Polar alignment using phone (southern hemisphere friendly) ;)

Tags

You might also like