Assorted Traxxas Maxx Battery Spacers 3D Printer Model
The file 'Assorted Traxxas Maxx Battery Spacers 3D Printer Model' is (stl) file type, size is 23.4KB.
The file 'Assorted Traxxas Maxx Battery Spacers 3D Printer Model' is (stl) file type, size is 23.4KB.
I recently converted my Maxx to 6s and I needed the battery tray to fit 6s Yowoo/Zeee 6000mAh batteries, so I whipped up an extraordinarily simple spacer in Tinkercad that works great.
I scaled it in a bunch of different sizes for different needs and fine adjustments. Feel free to scale it yourself if you need a very specific size.
For me, I found that the 5.8mm spacer size works great for a nice snug fit of the Yowoo and Zeee 6000 6s batteries. Depending on your battery's wire size, you may need a slightly taller spacer in the front.
| 10mm_Spacer.stl | 7.9KB | |
| 12mm_Spacer.stl | 7.9KB | |
| 14mm_Spacer.stl | 7.9KB | |
| 16mm_Spacer.stl | 7.9KB | |
| 18mm_Spacer.stl | 7.9KB | |
| 20mm_Spacer.stl | 7.9KB | |
| 4mm_Spacer.stl | 7.9KB | |
| 5.8mm_Spacer.stl | 7.9KB | |
| 5mm_Spacer.stl | 7.9KB | |
| 6.8mm_Spacer.stl | 7.9KB | |
| 6mm_Spacer.stl | 7.9KB | |
| 7mm_Spacer.stl | 7.9KB | |
| 8mm_Spacer.stl | 7.9KB | |
| 9mm_Spacer.stl | 7.9KB |
