Assembled case for glasses, pens and more. Initially it was supposed to be a case for glasses, but after printing the first sample, the idea arose to make it compact. So that when the case is not in use, it takes up little space and is convenient to store.
The case is printed in one piece, the gap between the moving parts is 0.25mm, so if your flow or table level is poorly calibrated, the parts may melt...
I made several options with different widths, the width is indicated on the model, this value when folded, on the table the parts will take up 60mm more.
You can also increase the details, I did 130%, and at these values it is already harder to snap the clamp.
I used PETG because it is more elastic.
Layer height - 0.2-0.24mm
Filling - 10%
Print without supports
| case160mm.stl | 1.5MB | |
| case_110mm.stl | 1.2MB | |
| case_130mm.stl | 1.4MB | |
| case_150mm.stl | 1.5MB | |
| case_90mm.stl | 1.1MB |
![Halo Infinite – UTIL/ENAV AMMO POUCH V2 [Game Based] 3D Printer Model](https://cdn.3axis.co/assets/64/f3/b6/65/64f3b665-2670-4044-82db-23d992af0a35/images/f95f652d-5e9e-467b-ad99-ad215854d96d_thumb.jpg)
