This is a set of tool holder blocks.
Yes, it's that easy as you think!
Why not design / print / assemble / organize these parts in our own way?
Or, redesign our own holder bricks and join the tab / slot part, just like a interlocking puzzle!
The last thing to do is screwing this set on the wall.
No more giant printing piece - with unsatisfied design!
========== about the bricks : ==========
No. 00, 01, 02 is for screwing the tool holder to the wall.
No. 03, 04, 08 screw drivers (diameter 4 / 8 / 9.5 mm).
No. 05 quick wrench.
No. 06 digital caliper.
No. 07 scissors.
No. 09 nail drawer.
No. 10 cutter.
No. 11 pliers.
No. 12 smooth file.
Unit_Yin = slot.
Unit_Yang = tab.
the width of each block is 15 mm.
=================================
It can be very easy to modify the block and add slot and tab part at two sides.
Enjoy it and have fun!
Printing Profile :
infill : 20%
shells : 2
layer height : 0.2 mm
raft : yes
support : yes
material use : around 84 g
Print time : around 7.5 hours
for someone have curling problem with big piece printing, you can check this page of No. 09 "Design with mouse ears".
http://goo.gl/xyWeCu
Update!!! add 3 more block for hold onto Replicator 2.
Update!!! add 6 joints for more rows! (@heytiger)
| toolBox_00_holder_M.stl | 678.7KB | |
| toolBox_01_holder_L.stl | 517.6KB | |
| toolBox_02_holder_R.stl | 391.0KB | |
| toolBox_03_ScrewDriver_A.stl | 682.1KB | |
| toolBox_04_ScrewDriver_B.stl | 688.9KB | |
| toolBox_05_QuickWrench.stl | 652.2KB | |
| toolBox_06_DigitalCaliper.stl | 1.3MB | |
| toolBox_07_Scissors.stl | 793.0KB | |
| toolBox_08_ScrewDriver_C.stl | 623.7KB | |
| toolBox_09_NailDrawer.stl | 759.2KB | |
| toolBox_10_Cutter.stl | 610.9KB | |
| toolBox_11_Pliers.stl | 659.7KB | |
| toolBox_12_SmoothFile.stl | 602.5KB | |
| unit_Joints.stl | 3.8MB | |
| unit_R2_L.stl | 444.1KB | |
| unit_R2_M.stl | 627.3KB | |
| unit_R2_R.stl | 418.7KB | |
| unit_Yang.stl | 156.6KB | |
| unit_Yin.stl | 123.8KB |
