I STRONGLY RECOMMEND PRINTING IT LAYING ON ITS SIDE.
There it is!
For people who dont want to wait anymore. Here is a reverse engineered Version of Aseteks Quick Release for custom wheels. It has very little to no play and is rock solid.
You'll need 2x M3x15mm Bolts for the lever and i used a 8 x 20 mm spring i had lying around from an extruder upgrade.
Both parts were printed with 85% infill.
It was quite time consuming to get this right, so a little donation would be appreciated.
If you have any questions, feel free to ask!
Have Fun!
Dont sell this Model or printed Versions without my consent. Thanks!
| Lever.step | 380.2KB | |
| Lever.stl | 999.4KB | |
| Main_Body.step | 796.7KB | |
| Main_Body.stl | 950.5KB |
