Ascent 18 Spring Cups 3D Printer Model
The file 'Ascent 18 Spring Cups 3D Printer Model' is (stl) file type, size is 39.5KB.
The file 'Ascent 18 Spring Cups 3D Printer Model' is (stl) file type, size is 39.5KB.
Spring Cups for the Redcat Ascent 18
The "LOW" drops the spring about 5mm
The "MID" drops the spring about 4mm
Drops the whole truck down and adds sag in order to lower the CG.
I run the stock cups in the rear and the Low in front but I am by no means a comp crawler
These cups simply push on and stay in place. I recommend a dab of glue on the top of the springs so that the spring stays attached to the TOP portion of the shock (not the 3d printer cup)
| A18_Spring_Cup_Low.stl | 98.5KB | |
| A18_Spring_Cup_Mid.stl | 112.6KB |
![Honda Civic EK9 [G8D-240H-A] Remote Control Keyfob 3D Printer Model](https://cdn.3axis.co/assets/2d/07/da/6b/2d07da6b-6a62-4e3c-aba6-bf360939053f/images/56164047-4cd2-49e6-a559-d6551513000c_thumb.jpg)
