This is my approach to building a housingfor the Artillery Sidewinder X1
This Housing needs steel sheets. You can drill them buy yourself, or you can use the dxf fies to get them laserutted, for example at geerscutting.com

This steel sheet housing will add a lot of weight to your printer. So you should have a place where you don't have to move the printer each day.

The bottom Plate of the Printer will be replaced with the bottom.dxf steel plate. This allow you to still cool your ptinter electronics with fresh air from the outside, while the printchamber is isolated from the oiutside.

I still need to design the air ducts for the outgoing air.

##############################################

Housing sheets:

##############################################

1mm steel sheet:

1x back.dxf
2x side.dxf

2mm (better 3 or 4mm) steel sheet:

1x bottom.dxf
1x top.dxf

3mm Polycarbonat sheet:

2x 235mm x 680mm

##############################################

Extruded Aluminum (20x20mm profiles nut 6)

##############################################

4x 680mm (connects the bottom with the top plate)
2x 700mm (connects the front with the back and the top)
2x 470mm (connects the left and right side at the back
2x 220mm (for the spool holder)

##############################################

Extruded Aluminum (20x40mm profiles nut 6)

##############################################
2x 50mm (to connect the Z Portal with the Top of the housing)

##############################################

Other parts:

##############################################

4x KP001 bearing for 12mm rod
2x 20cm long 12mm rod
8x 2020 corner
45x Nut 6 slot nut with m4 thread
45x M4x7mm Screw
6x M3x8mm Screw
8x M6x20mm Screw
4-6x rubber housing feets (40mm diameter, 25mm in height, M5 inner thread (or M8 thread and some m8 to m5 converter)
4-6x M5x10mm Screw
1x M6 bowden tubing pushfit for filament guide
4x 20x20 hinges (like those: https://www.dold-mechatronik.de/Scharnier-20x20-leicht-B-Typ-Nut-6 )
4x 40x40 Profile connector plate ( https://www.dold-mechatronik.de/Verbinderplatte-Alu-vernickelt-40x40 )
1x Sunon EE80252BX-A99 (optional beter 24v cooling fan for electronics)

##############################################

Tools:

##############################################

1x M6 Thread drillbit
1x loctite