An expandable cap for the printer frame. It covers sharp and unsightly edges and can be extended with a camera arm.
With 0.2 mm distance between component and frame it fits exactly and is very tight.
You only need two bolts or nails (as shown in the picture) to fix the extension stable.
Please look at the pictures below for more details. (because a picture says more than 1000 words)
Edit:
Second-Edit:
As always in my designs, I did my best to avoid the need for supports in printing and kept the print itself simple. Do the environment the favor and produce less waste.
| Addon_cap.stl | 202.6KB | |
| Clamp_arm.stl | 532.9KB | |
| Clamp_leg.stl | 152.9KB | |
| Complete.stl | 568.2KB | |
| End_Hinge.stl | 185.7KB | |
| Hinge_Addon.stl | 353.5KB | |
| Middle_hinge.stl | 363.5KB | |
| Pad.stl | 1.1MB |
