This is a TWO-PART Z motor active cooler for the Artillery GENIUS printer.
It makes use of a 40x40x11 alluminum heatsink and a 40x20 axial fan in order to properly cool the stepper.
Noctua NF-A4x20 FLX 12v fan advised, along with a voltage regulator.
"Heatsink" is screwed to the printer base using the same screws you will find behind the stepper and "Fan", screwed to heatsink.
Z steppers do not usually need any cooling but if you get your printer enclosed it would be a nice addition.
The files provided are for the left side, mirror them in order to print the one for the right side!
WHAT DO YOU NEED:
40 x 40 x 11 alluminum heatsink (with thermal pad).
40 x 40 x 20 axial fan.
4 unids M3 x 30mm screws.
| FAN.stl | 7.7MB | |
| HEATSINK.stl | 336.2KB |
