Here you got, a simple spacer to allow you to upgrade your extruder to a Dual-drive NF Wind V6 Extruder from aliexpress.
It introduces Zaxis offset of 8mm to allow nozzle reach the bed, Yaxis offset of 10mm to prevent the fan collision with the stepper.
You will need to shorten the probe pin and pull it up a bit by any means (like drilling the holes to extend them).
The stock front blower will collide with the bed if it have the fixed duct, you can cut it or change it to fit.
Remember to recalibrate all offsets of the probe( yes all X, Y, Z offsets) and also the rotation distance (mine is 7.777, changed from stock 7.1910)
Enjoy!
| WindAdapterAGP.stl | 49.6KB |
