Articulating Motorcycle Cell Phone Mount (161 X 77 X 14mm Cavity) 3D Printer Model
The file 'Articulating Motorcycle Cell Phone Mount (161 X 77 X 14mm Cavity) 3D Printer Model' is (FCStd,stl) file type, size is 831.8KB.
The file 'Articulating Motorcycle Cell Phone Mount (161 X 77 X 14mm Cavity) 3D Printer Model' is (FCStd,stl) file type, size is 831.8KB.
If you want a specific size for your phone, message me and request it and I will upload one for you. This one is 161 X 77 X 14mm.
This is a quick and easy cell phone mount for any motorcycle or bicycle with 7/8" handlebars. It is designed for a Google Pixel 4A in a small case, but it can be adjusted to fit just about any phone. I included the FreeCAD file which has a "parameters" spreadsheet which will change any dimension in the drawing by simply changing a number.
All bolt sections are for metric 6mm bolts. The pivot sections are countersunk to make clearance. The top bolt should be a M6X12mm or 6X16mm. The side bolt will be an M6X30mm. The pinch bolts are socket cap screws. The hinge is nothing more than a section of 1.75mm filament. I melted the ends flat with a soldering iron to hold them but glue will work fine.
I HIGHLY recommend making the handlebar clamp and the swivel mount (phone mount base) out of TPU with about 25% infill to reduce vibration that could damage your phone's camera. The top can be made from PLA or PETG.
| Cell_phone_mount_rev0.FCStd | 548.5KB | |
| Handlebar_mount_rev2.stl | 53.4KB | |
| Phone_base_rev4.stl | 576.8KB | |
| phone_mount_base_rev2.stl | 576.8KB | |
| Phone_top_rev3.stl | 217.3KB |
