Several friends commented that my squid reminded them of a spider, so I decided to make a large posable spider using the joints from Ellindsey's Ball-Joint Articulated Octopus. Since I changed so many things, I have included them all here so you won't have to look elsewhere for parts. I used the Pull Chain Fobs Tarantula from 123D as a source model for the body.
Updated on 9/11/16 with all non-manifold shapes fixed.
| Spider_Body.stl |
| Spider_Body4.stl |
| Spider_joint.stl |
| Spider_joint_x8.stl |
| Spider_Leg_Tip.stl |
| Spider_Leg_TipX8.stl |
| Spider_Long_Leg_Seg.stl |
| Spider_Long_Leg_Segx8.stl |
| Spider_Pedipalps.stl |
| Spider_Pedipalp_Joint.stl |
| Spider_Pedipalp_Seg.stl |
| Spider_Pedipalp_Tip.stl |
| Spider_Short_Leg_Seg.stl |
| Spider_Short_Leg_Segx8.stl |
