This is a stinky cheese man figure based from the book The Stinky Cheese Man and Other Fairly Stupid Tales written by Jon Scieszka and illustrated by Lane Smith. A favorite from my childhood.
Haven't you also always wanted your very own stinky cheese man?!
This model prints in two parts. The head connects with a snap connector. This connector is not a circle but an oval. You need to make sure the face aligns with the front of the body, tilt the head to one side and pop it in (see image depicting this).
If you try to press the connector in when the face is crooked, it will not work and could break the connector on the neck.
It is designed this way to keep the face from rotating 360 degrees to the back.
No brim needed.
YOU WILL NEED TO ADD SUPPORT FOR THE NECK OF THE BODY!
Use paint-on-supports and just do the bare minimum for easy removal. The connector will not work properly if extra support filament is stuck between the prongs.
This model is 100% my own creation and I give the following permissions:
You can:
Sell printed models (online or locally)*
Create remix versions with attribution
Please don't:
Sell the model files
Claim the model as your own
Claim remixes as solely your own
*I do not own the licensing to Stinky Cheese Man merchandise and am unclear on when fan art is allowed to be sold commercially.
| Cheese-head.stl | 3.8MB | |
| Cheese_body+Head.stl | 9.5MB | |
| Cheese_body.stl | 5.7MB |
