Articulated Skeleton 3D Printer Model
The file 'Articulated Skeleton 3D Printer Model' is (stl,3mf) file type, size is 68.5MB.
The file 'Articulated Skeleton 3D Printer Model' is (stl,3mf) file type, size is 68.5MB.
This skeleton is a remix of Posable Skeleton (from Fub-Artistry), which is itself a remix of Mr Bones (from graphix25). Since I'm on the topic of giving credit, I will also mention that the split ribs files come from Mr Bones Chest Remix (from Skrat6009). I included the split ribs for completeness, but I found that I could remove the supports from the original ribs, and I preferred that over having to glue the parts together.
My contributions to this project include three parts. First, I fixed the neck joint. The original model included a separate neck joint that did not come close to fitting into the hole in the skull. My version includes a neck joint that is already attached to the skull. Second, I split the model into individual parts so that each could be printed, scaled, and arranged individually. Finally, I created the a few print profiles. I wanted to include versions that could fit all the pieces (at 100% scale) onto a build plate as small as the A1; as well as a version that maxed out the standard 256mm build plate (300% scale).
If you choose to go big with this model, I would recommend using a heat gun on the joint sockets just before connecting each joint. I found out the hard way that the joints tend to crack when scaled up that high.
| arm_left_lower.stl | 286.4KB | |
| arm_left_upper.stl | 257.3KB | |
| arm_right_lower.stl | 286.3KB | |
| arm_right_upper.stl | 257.1KB | |
| foot_left_curled.stl | 808.9KB | |
| foot_left_flat.stl | 815.3KB | |
| foot_right_curled.stl | 808.9KB | |
| foot_right_flat.stl | 815.1KB | |
| full_set_full_ribs.stl | 22.8MB | |
| full_set_full_ribs_A1_mini.3mf | 6.9MB | |
| full_set_split_ribs.stl | 32.7MB | |
| full_set_split_ribs_A1_mini.3mf | 9.9MB | |
| hand_left_curled.stl | 783.5KB | |
| hand_left_flat.stl | 783.3KB | |
| hand_right_curled.stl | 783.4KB | |
| hand_right_flat.stl | 783.4KB | |
| jaw.stl | 684.8KB | |
| jumbo_version_A1.3mf | 7.8MB | |
| leg_left_lower.stl | 365.8KB | |
| leg_left_upper.stl | 328.2KB | |
| leg_right_lower.stl | 366.0KB | |
| leg_right_upper.stl | 328.2KB | |
| pelvis.stl | 2.3MB | |
| ribs_back.stl | 14.5MB | |
| ribs_front.stl | 3.0MB | |
| ribs_full.stl | 7.5MB | |
| skull.stl | 3.6MB |
