Articulated Single Part Wing For Articulated Dragon Seven Point Five And Nine 3D Printer Model
The file 'Articulated Single Part Wing For Articulated Dragon Seven Point Five And Nine 3D Printer Model' is (stl) file type, size is 16.7MB.
The file 'Articulated Single Part Wing For Articulated Dragon Seven Point Five And Nine 3D Printer Model' is (stl) file type, size is 16.7MB.
This is an alternate wing for "Articulated Dragon Seven point five And Nine"(https://www.thingiverse.com/thing:3125150). I had originally made this for my make of the dragon but I've since received a request to make this model available. The wing itself is based on the dragon wings from this model: https://www.thingiverse.com/thing:2719531
IMPORTANT: The wing is a ball-jointed type wing and is meant to be assembled with an elastic cord that joins both wings through the updated body piece. This is not a snap-in design like the original dragon. There is an updated body piece for the dragon itself which adds holes to string the elastic through. I recommend using 2mm elastic cord for this or smaller (2mm worked for me).
| Body_01_with_wing_holes.stl | 32.7MB | |
| solid_wing.stl | 1.9MB |
