Articulated MWO Spider 3D Printer Model
The file 'Articulated MWO Spider 3D Printer Model' is (STL,zip) file type, size is 901.4KB.
The file 'Articulated MWO Spider 3D Printer Model' is (STL,zip) file type, size is 901.4KB.
MWO Spider
113mm tall by standard but i recommend scale up the size for easy assemble, better joint effective strength.
Hard to make due to small size, This is not good.
| Arm_SET.STL | 272.2KB | |
| Elbow_Link.STL | 18.9KB | |
| Elbow_Pin_For_150.STL | 3.8KB | |
| Foot_Hub.STL | 79.4KB | |
| Knee.STL | 89.2KB | |
| Lower_Leg.STL | 85.1KB | |
| Pelvis.STL | 76.4KB | |
| Rader_wing.STL | 22.4KB | |
| Sholder_Link.STL | 80.9KB | |
| Toe_001.STL | 6.7KB | |
| Toe_002.STL | 15.8KB | |
| Toe_003.STL | 22.1KB | |
| Toe_004.STL | 12.5KB | |
| Toe_005.STL | 30.2KB | |
| Toe_Solid.STL | 38.1KB | |
| Torso.STL | 408.3KB | |
| Torso_Add_1.STL | 1.7KB | |
| Torso_Add_2.STL | 2.3KB | |
| Torso_Pin.STL | 43.4KB | |
| Upper_Arm.STL | 101.7KB | |
| Upper_Leg.STL | 185.2KB | |
| Weapon_Arm.STL | 190.2KB | |
| Weapon_Arm_Fist.STL | 74.0KB | |
| Without_Support.zip | 288.3KB |
