This model comes in two versions. One with eyes and one with eye cutouts. You can use the printable eyes to make them a different color or use flatback beads or other items.
This print requires no support or brim. The model can be printed scaled down a bit. I suggest looking at your slicer to determine when the parts start fusing or become too small.
I suggest printing the eyes very slow (~30mm/s) or else they tend to get knocked off the plate or not form correctly. I also suggest slowing down the print if you scale the model down quite a bit.
I have used flatback red pearl beads for the eyes in the small dragon. The blue snake eyes on the pink/purple model are actually fishing lure sticker eyes. You can buy these in sheets and they come in various sizes. Even though these are sticky, I still use E600 glue to secure them. You can also find small glass eyes for doll making which look interesting on printed models.
This model is 100% my own creation and I give the following permissions:
You can:
Sell printed models (online or locally)
Remix or use parts of this model to create new models (with attribution, please)
Please don't:
Sell model files
Claim the model as your own creation
Claim the model as your sole creation (if a remix)
**Filaments used in some of the model:
Ziro Matte Matcha (green gradient matte)
Elegoo Matte White
Polymaker Polytera Matte Rainbow (pink/purple gradient in photo)
Polymaker Starlight Blue
IWECOLOR Matte tricolor Pink Purple Yellow (this one is hard to find, but Ziro makes a few matte tricolors and their “Maple” one and “Rosy Cloud” look very similar.
| eye-set7mm.stl |
| LotusDragon_noEyes7mm.stl |
| LotusDragon_wEyes.stl |
![Dragonslayer Sword Spear [Dark Souls III] 3D Printer Model](https://res.3axis.co/6a8b1b24-555b-4779-8a3d-f8f5e15b9446/images/dce6ccc9-74a5-46f6-b3a6-79b59be68656_thumb.jpg)
