Articulated Finger Extensions 3D Printer Model
The file 'Articulated Finger Extensions 3D Printer Model' is (stl,f3d) file type, size is 23.3MB.
The file 'Articulated Finger Extensions 3D Printer Model' is (stl,f3d) file type, size is 23.3MB.
My take on Gary Fay's articulated fingers extentions.
I've made the fingers as thin as I could so I can add differents 3d printed skins later (like a skeleton skin, a monster skin, an evil witch skin, etc.).
I know the thumb isn't suppose to have that many phalanx but I thought it was spookier like this.
Those are custom-made for my hands so you'll have to adapt them for you.
My hands (length of fingers from inner webbing to the top) :
• Thumb 70mm
• Index finger 80mm
• Middle finger 85mm
• Ring finger 85mm
• Pinky finger 60mm
Width of my fingers are around 20mm.
I used filament for all the axis. Easy to cut to any size needed. Burn each end and squeeze them.
Edit:
• 17/05/20 Updated MF_Pha_A, PIN_Pha_A and THUMB_Pha_A
• 24/05/20 Uploaded the skeleton skin : https://www.thingiverse.com/thing:4391928
• 24/05/20 Uploaded the files used to create a skin: https://www.thingiverse.com/thing:4392074
• 30/05/20 Uploaded the Fusion 360 file
PARTS YOU'LL NEED TO PRINT FOR ONE HAND :
5X Axe
5X Gear_A
5X Gear_B
3X MF_Pha_A
2X MF_Pha_B
3X MF_Pha_BF_Base
3X MF_Pha_BF_Top
4X MF_Pha_C
1X MF_Pha_D_Top
1X MF_Pha_D_Base
2X MF_Shaft_A
2X_MF_Shaft_B
1X IND_Pha_B
2X IND_Pha_C
2X IND_Pha_D_Top
2X IND_Pha_D_Base
1X IND_Shaft_A
1X IND_Shaft_B
1X PIN_Pha_A
1X PIN_Pha_B
1X PIN_Pha_BF_Top
1X PIN_Pha_BF_Base
4X PIN_Pha_C
2X PIN_Pha_D_Top
2X PIN_Pha_D_Base
1X PIN_Shaft_A
2X PIN_Shaft_B
1X THUMB_Pha_A
1X THUMB_Pha_B
1X THUMB_Pha_BF_Top
1X THUMB_Pha_BF_Base
1X THUMB_Shaft_A
1X Wrist
PARTS FOR EACH FINGERS :
Thumb :
1X Axe
1X Gear_A
1X Gear_B
1X THUMB_Pha_A
1X THUMB_Pha_B
1X THUMB_Pha_BF_Top
1X THUMB_Pha_BF_Base
1X THUMB_Shaft_A
2X PIN_Pha_C
1X PIN_Pha_D_Top
1X PIN_Pha_D_Base
1x PIN_Shaft_B
Index finger :
1X Axe
1X Gear_A
1X Gear_B
1X IND_Pha_B
2X IND_Pha_C
1X IND_Pha_D_Top
1X IND_Pha_D_Base
1X IND_Shaft_A
1X IND_Shaft_B
1X MF_Pha_A
1X MF_Pha_BF_Base
1X MF_Pha_BF_Top
Middle finger :
1X Axe
1X Gear_A
1X Gear_B
1X MF_Pha_A
1X MF_Pha_B
1X MF_Pha_BF_Base
1X MF_Pha_BF_Top
2X MF_Pha_C
1X MF_Pha_D_Top
1X MF_Pha_D_Base
1X MF_Shaft_A
1X_MF_Shaft_B
Ring finger :
1X Axe
1X Gear_A
1X Gear_B
1X MF_Pha_A
1X MF_Pha_B
1X MF_Pha_BF_Base
1X MF_Pha_BF_Top
2X MF_Pha_C
1X IND_Pha_D_Top
1X IND_Pha_D_Base
1X_MF_Shaft_A
1X_MF_Shaft_B
Pinky finger :
1X Axe
1X Gear_A
1X Gear_B
1X PIN_Pha_A
1X PIN_Pha_B
1X PIN_Pha_BF_Top
1X PIN_Pha_BF_Base
2X PIN_Pha_C
1X PIN_Pha_D_Top
1X PIN_Pha_D_Base
1X PIN_Shaft_A
1X PIN_Shaft_B
| Axe.stl | 165.7KB | |
| Gear_A.stl | 551.2KB | |
| Gear_B.stl | 356.4KB | |
| Hand_prototype01_v59.f3d | 20.3MB | |
| IND_Pha_B.stl | 1.1MB | |
| IND_Pha_C.stl | 85.8KB | |
| IND_Pha_D_Base.stl | 87.1KB | |
| IND_Pha_D_Top.stl | 72.4KB | |
| IND_Shaft_A.stl | 73.0KB | |
| IND_Shaft_B.stl | 77.8KB | |
| MF_Pha_A.stl | 408.8KB | |
| MF_Pha_BF_Base.stl | 192.2KB | |
| MF_Pha_BF_Top.stl | 79.9KB | |
| MF_Pha_B_.stl | 1.1MB | |
| MF_Pha_C.stl | 82.9KB | |
| MF_Pha_D_Base.stl | 104.3KB | |
| MF_Pha_D_Top.stl | 71.9KB | |
| MF_Shaft_A.stl | 76.4KB | |
| MF_Shaft_B.stl | 78.4KB | |
| PIN_Pha_A.stl | 396.0KB | |
| PIN_Pha_B.stl | 1.1MB | |
| PIN_Pha_BF_base.stl | 170.2KB | |
| PIN_Pha_BF_Top.stl | 113.6KB | |
| PIN_Pha_C.stl | 91.3KB | |
| PIN_Pha_D_Base.stl | 83.7KB | |
| PIN_Pha_D_Top.stl | 73.4KB | |
| PIN_Shaft_A.stl | 87.6KB | |
| PIN_Shaft_B.stl | 72.2KB | |
| THUMB_Pha_A.stl | 356.7KB | |
| THUMB_Pha_B.stl | 1.4MB | |
| THUMB_Pha_BF_Base.stl | 204.9KB | |
| THUMB_Pha_BF_Top.stl | 99.6KB | |
| THUMB_Shaft_A.stl | 94.4KB | |
| WRIST.stl | 1.8MB |
