Arrow 3D Printer Model

Author: @
License: CC BY
File formats: stl,doc
Download type: zip
Size:3.9MB

The file 'Arrow 3D Printer Model' is (stl,doc) file type, size is 3.9MB.

Summary

I wanted a practical & lightweight aeroplane that can fly in moderate wind (approx 10-15mph). It works! so I share this design.

The 3d printing is a multi STL setup for most parts using CURA.

Videos

Flying

3d Printing setup

Assembly

Also included a doc file with instructions and a full list of materials needed to complete the project. (Download files section)

Pre-Requisites

This build requires knowledge of radio control aeroplanes with regard to assembly,radio setup and the use of basic tooling. Also requires the knowledge of 3d printing, 3d printing software setup and the handling of PLA.

Other items required to build

  1. Motor - PLANET-HOBBY-JOKER-2826-12-V3-1450-KV
  2. ESC - HOBBYWING-Flyfun-V5-20A-2-4S
  3. Folding propellor - SUPER-FOLDING-PROPELLER-SET-8X4-3
  4. 9g Servos - Servos
  5. Battery – Lipo 11.1V 700-900 mahr 25C
  6. Control Linkages - THREADED-CONTROL-ROD-M2-250MM
  7. Clevises - CLEVIS-M2
  8. 2mm Self tapping screws - Screws
  9. 10mm * 2 mm round magnets - DISC-MAGNET-OE10MM
  10. 10mm Tube - CARBON-FIBER-TUBE-10-8MM-1M
  11. 8mm Tube - GLASS-FIBRE-TUBE-8-6MM-1M
  12. Hinge tape - TOPMODEL-Hinge-tape-set
  13. Glue - Araldite
  14. Radio control equipment FLYSKY FS-i6X 10CH 2.4GHz RC Transmitter

Tooling required

  1. Dremel with various cutting/sanding/drilling attachments - Dremel
  2. Sandpaper 200 grit or similar
  3. Crafting knife – Model Knife
  4. Masking tape – Masking Tape
  5. Straight edge – 90 Degree edge
  6. Screwdriver to suit screws – Screwdriver set
  7. Z-bend Plier – Plier
Acc_Tray.stl 89.3KB
Aileron_Inner.stl 9.0KB
Aileron_Outer.stl 884.0B
Aileron_Structure_Inner.stl 9.5KB
Aileron_Structure_Outer.stl 3.9KB
Battery_Tray.stl 67.5KB
Canopy_Back.stl 1.1MB
Canopy_Front.stl 1.3MB
Cockpit_Shell.stl 148.8KB
Cockpit_Structure.stl 208.0KB
Elevator_Lhs.stl 1.4KB
Elevator_Mid.stl 2.4KB
Elevator_Rhs.stl 1.4KB
Fin.stl 216.6KB
Fin_Structure.stl 30.6KB
Front_Canopy.stl 1.3MB
Instructions.doc 99.0KB
NoseMotor_Bk_Shell.stl 26.3KB
NoseMotor_Bk_Support.stl 226.4KB
NoseMotor_Fr_Shell.stl 151.5KB
NoseMotor_Fr_Support.stl 105.7KB
Prop_Center_Foldable.stl 36.4KB
Servo_Cover.stl 22.2KB
Servo_Fairing.stl 138.4KB
Servo_Mount.stl 68.3KB
Tailplane_Rh.stl 142.6KB
Tailplane_Structure_Rh.stl 52.7KB
Tail_Shell.stl 808.7KB
Tail_Shell_Structure.stl 313.3KB
Wing_Inner.stl 136.2KB
Wing_Inner_Support.stl 339.1KB
Wing_Outer.stl 80.8KB
Wing_Outer_Support.stl 162.5KB
Wing_Root.stl 540.0KB
Wing_Root_Structure.stl 440.3KB
Wing_tip.stl 251.2KB
Wing_tip_Support.stl 158.0KB