Arrma Typhon Clipless Magnetic Body Mounting 3D Printer Model
The file 'Arrma Typhon Clipless Magnetic Body Mounting 3D Printer Model' is (stl) file type, size is 27.5KB.
The file 'Arrma Typhon Clipless Magnetic Body Mounting 3D Printer Model' is (stl) file type, size is 27.5KB.
These are some body mounts I whipped together from racooncity's great design (https://www.thingiverse.com/thing:4903746) that are designed to hold neodymium magnets.
I personally need my body higher than standard as I've stuffed a whole Max6 combo into the Typhon, thus I've used 7mm thick magnets. If you want your body to be more standard ride height I'd use thinner magnets. For actually mounting the body I simply used some big steel washers and glued them to the body which seems to work well. I've tested it at 70mph without issue so far. 100+ testing is coming eventually and I'll update the part if I have any problems.
For the front, I placed the magnet directly onto the mounting plate using an M3 screw with a locknut underneath, to keep the front down under high speed. I've included a thin spacer as well in case you have a very thin magnet or want your entire body to be higher.
| Angled_Typhon_Magnetic_Rear_Mount.stl | 75.5KB | |
| Typhon_Magnetic_Front_Mount.stl | 7.9KB |
