Arrma Typhon 3s Rear Arms (0°,1°,2° Toe Versions) 3D Printer Model
The file 'Arrma Typhon 3s Rear Arms (0°,1°,2° Toe Versions) 3D Printer Model' is (stl) file type, size is 550.2KB.
The file 'Arrma Typhon 3s Rear Arms (0°,1°,2° Toe Versions) 3D Printer Model' is (stl) file type, size is 550.2KB.
I am trying to get the most out of my arrma typhon 3s before i eventually purchase a proper track car.
At my local track the car has been in dire need of some rear toe. So id figure i would design my own arms that have the rear toe incorporated since there is no adjustability on the typhon 3s.
Welcome to experiment with filaments.
Ive tried tpu 75D. Seems to work the best, but still has a bit too much give for my liking. if you find other filaments that work with high impact resistance please let me know. I want something a tad bit stiffer. But 75D will definitely not break. :)
Printing orientations is just on the opposite side of where the screw for shock mount is. This side facing down touching the build plate. I use brim to make sure my tree supports dont fall down during printing.
| Typhon_3s_Rear_Arm_1_Degree_Toe.stl | 443.9KB | |
| Typhon_3s_Rear_Arm_2_Degree_Toe.stl | 443.1KB | |
| Typhon_3s_Rear_Arm__0_Degree_Toe.stl | 442.7KB |
