Update 9/28/2020: Added 40mm fan versions of this mount.

Description:
These are fan adapter plates designed to replace the 50mm fan used on the Kraton 8s heatsink (ARA390296) with dual 30mm or 40mm fans.

See the file names and associated descriptions below. Be sure to read carefully and only print the correct version you desire for your specific application.

30mm Adapter:
Kraton8s_Heatsink_Dual_30mm_Fan_Adapter_Plate.stl
30mm fans secured by 3mm sized screws of appropriate length threaded directly into the adapter.

40mm Adapters (M3 screws only):

K8S_heatsink_adapter_2x40mm.stl
40mm fans secured by 3mm sized screws of appropriate length threaded directly into the adapter. Because of the fan width the adapter extends over the ends of the heatsink so airflow will slightly bleed around the sides.

K8S_heatsink_adapter_2x40mm_sealed.stl
40mm fans secured by 3mm sized screws of appropriate length threaded directly into the adapter. Because of the fan width the adapter extends over the ends of the heatsink, the "sealed" version close the opening around the sides so airflow is only directed through the fins.

40mm Adapters (M3 screws + M3 locknuts):

K8S_heatsink_adapter_2x40mm_M3nuts.stl
40mm version with openings to insert M3 locknuts into the base for securing M3 screws of appropriate length. Because of the fan width the adapter extends over the ends of the heatsink so airflow will slightly bleed around the sides.

K8S_heatsink_adapter_2x40mm_M3Nuts_sealed.stl
40mm version with openings to insert M3 locknuts into the base for securing M3 screws of appropriate length. Because of the fan width the adapter extends over the ends of the heatsink, the "sealed" version close the opening around the sides so airflow is only directed through the fins.