ARRMA Infraction 6s Body Post Mod For “Quick Latch Hood Pins” 3D Printer Model
The file 'ARRMA Infraction 6s Body Post Mod For “Quick Latch Hood Pins” 3D Printer Model' is (stl) file type, size is 473.8KB.
The file 'ARRMA Infraction 6s Body Post Mod For “Quick Latch Hood Pins” 3D Printer Model' is (stl) file type, size is 473.8KB.
Update 06/20/2024:
Taking sparky-john's suggestion and change the rear body mount so you can access the other two shock holes.
Added the following new .stl's:
Front_body_post_mount_new_no_alignmentcountersunk v4.stl
Rear_body_postmount no alingment_v3.stl
Rear_body_post_mount_no alingment_countersunk v3.stl
Rear_body_post_V2.2a_right_v5.stl
Rear_body_post_V2.2a_left_v3.stl
Note:
I Started with a Limitless V2 Roller and coverted it to an Infraction 6s so I could mount a BittyDesign ARES-1 body.
I like the Idea of the "Quick Latch Hood Pin" holding the body to the chassis.
Need to modify the body post mounts as these quick latch hood pins and ARES-1 body could not use the stock mounts.
Besides the printed parts you'll need the following:
BittyDesign ARES-1 1/7 Scale or simular body type.
4 pcs. of 22MM Quick Latch Hood Pins or equivalent.
4pcs. of M3 heat inserts McMaster-Carr or equivalent
6pcs. M3 x 8mm socket head screws
| Front_body_post_mount_new_no_alignment_countersunk__v4.stl | 68.6KB | |
| Front_body_post_mount_new_no_alignment_v1.stl | 76.4KB | |
| Front_body_post_mount_new_v8.stl | 61.6KB | |
| Rear_body_post_left_v2.stl | 122.9KB | |
| Rear_body_post_mount_no_alingment_countersunk_v3.stl | 136.7KB | |
| Rear_body_post_mount_no_alingment_v2.stl | 185.0KB | |
| Rear_body_post_mount_v48.stl | 199.9KB | |
| Rear_body_post_mount___no_alingment_v3.stl | 177.3KB | |
| Rear_body_post_right_v2.stl | 122.8KB | |
| Rear_body_post_V2.2a_left_v3.stl | 222.1KB | |
| Rear_body_post_V2.2a_right_v5.stl | 222.1KB |
